RNGR.net is sponsored by the USDA Forest Service and Southern Regional Extension Forestry and is a colloborative effort between these two agencies.

U.S. Department of Agriculture USDA Forest Service Southern Regional Extension Forestry Southern Regional Extension Forestry

Skip to content. | Skip to navigation

Home Native Plant Network
 
NPN Protocol Details Image

Amelanchier (utahensis)

Greg Fenchel
USDA NRCS - Los Lunas Plant Materials Center
1036 Miller Street, SW
Los Lunas, New Mexico 87031
(505) 865-4684
(505) 865-5163 (fax)
llunas@nmsu.edu
http://plant-materials.nrcs.usda.gov/nmpmc

Family Scientific Name: Rosaceae
Scientific Name: Amelanchier utahensis Koehne
Common Name: Utah Serviceberry
Species Code: AMEUTA
Propagation Goal: plants
Propagation Method: seed
ProductType: Container (plug)
Time To Grow: 0
Target Specifications: Stock Type: One-Gallon Tree Pot, 4"x4"x14". Root System: Consolidated root mass sufficient to prevent root ball disintegration during outplanting.
Propagule Collection: Collected in Grand Canyon National Park, Arizona.
Pre-Planting Treatments: Stratification: 2-3 months.

Cold Stratification: Those species which require cold stratification are typically sown in plug trays and placed on the watering bench for several days to ensure that the media is thoroughly moist and seed are imbibed. The seeded plug flats are covered with an inverted empty plug flat; to allow the 4 to 5 seeded flats are stacked with the inverted flats acting as spacers. These stacked flats are placed in clean or disinfected polyethylene bags used for soilless media and are sealed with twist-ties; these bags contain perforations punched by the media manufacturer, which allow air exchange. These plug tray stacks are placed in a walk-in cooler held at 40 F and periodically checked for signs of germination or the need for adding moisture. When germination has started or when a sufficient stratification period has passed, the plug flats are moved to the greenhouse and placed on the watering bench.

Soaking/Leaching: A number of species may benefit from a rigorous imbibition treatment and/or leaching of germination inhibitors. These seeds are put in rubber-lined rock tumbler jar along with tap water to undergo a wet tumbling which agitates the seed allowing easy oxygen and water entry into the seed. The water in the tumbler is changed daily to remove any inhibitors that may have leached out. The duration of tumbling is a guess based on the appearance of the seed and the leach water.
Pre-soaking or wet tumbling results in mucilaginous mass that makes sowing difficult.
Growing Area Preparation/
Annual Practices for Perennial Crops:
Propagation Environment: Greenhouse 70§F day, 55§F night during winter, maximum summer temperature 85§F. A watering bench with mini-sprinklers automatically waters plug trays once a day in early morning. In extremely hot periods during the summer, twice a day watering is programmed. The watering bench is covered with a copper-coated fabric (Texel Forestry Fabric) to reduce root egress from the plug cells; this fabric covers a filter fabric (Dewitt Filter Fabric) which acts to pull excess water out of plug cells via capillary water movement.

Seed Propagation Method: Dry or pretreated seed are sown in plug flats with square deep cells (288 or 512 cells per flat). Media is a commercial soilless mix (Sunshine #1); plug trays are loosely filled with dry to slightly moist media, leveled off, and then compressed with an empty plug tray. The number of seed sown depends on size and estimated germination. Small or fluffy seed are dispersed as evenly as possible. Larger and more easily handled seed are sown with a goal of 2 to 5 seed per cell. Very small seed is not covered if its size will allow the seed to be washed into the media with overhead sprinkling. Larger seed with a possible light requirement are lightly covered with perlite. Fluffy seed receive a light covering of media enough to provide contact between seed and the moist plug media. Larger seed is covered with 5 to 10 mm of media.

Container Type and Volume: Ray Leach Super Cell - 10 cubic inch volume, 1.5-inch diameter, and 8.25-inch depth.

Growing Media: Mix of 2 parts Sunshine #1 or #2 with 1 part perlite. 2 to 4 kg of controlled release fertilizer (CRF) Osmocote Plus 15-9-12 incorporated per cubic yard of mix. For plants started in the greenhouse during winter, 8-9 month release CRF is used, but for spring grown material 3-4 month release CRF is used.
Establishment Phase: Sowing/Planting Technique: The filled Super Cells are dibbled to provide a hole for the plug seedling. The plug seedling root ball is removed using a flat powder spatula with a blade about 6 mm wide and 30 mm long attached to a handle. The blade is plunged along the side of root ball and the seedling plug is levered out of the cell. The plug is dropped into the dibbled hole. Top watering firms and fills any voids around the plug. If excessive numbers of seed have germinated, excess seedlings are cut off during the plug transplanting process.
Must be transplanted soon after germination before radicle elongates.

Seed Treatment Pre-soaking or wet tumbling results in mucilaginous mass that makes sowing difficult.

Establishment Phase: The Super Cell seedlings in the greenhouse are watered with soluble fertilizer at every other watering. The fertilizer solution is Peters Peat Lite Special 20-10-20 at a rate of200-mg/l nitrogen. Thinning of seedlings down to one per container occurs during this phase, usually when the seedlings are 2 to 4 cm tall.Seedling growth is rapid during the establishment phase.
Active Growth Phase: Rapid Growth Phase: Fertigation continues as described in Establishment Phase. Irrigation requirements are moderate for this species once well estblshed in containers.
Hardening Phase: Hardening Phase: The goal is to have the Super Cell seedlings ready to move outside in early May after the last freeze but before excessively hot outdoor temperatures. In the outdoor nursery, larger seedlings may require watering every day, smaller seedlings generally every other day. The seedlings are fertigated about once a week with Peters Peat Lite Special 20-10-20 at a rate of 200-mg/l nitrogen.
Harvesting, Storage and Shipping: Total Time to Harvest: The time required to produce a seedling ready for transplanting into a one gallon tree pot is very dependent on species and the time of year in the greenhouse. Fast growing species can be ready in 3 to 4 months from germination. Slow growing species can take over a year.
Other Comments: Comment: Fast seedling growth, moderate later growth, moderate water requirement.

Citation:

Dreesen, Dave. 2003. Propagation protocol for production of Container (plug) Amelanchier utahensis Koehne plants USDA NRCS - Los Lunas Plant Materials Center Los Lunas, New Mexico. In: Native Plant Network. URL: https://NativePlantNetwork.org (accessed 2024/03/29). US Department of Agriculture, Forest Service, National Center for Reforestation, Nurseries, and Genetic Resources.